YOKOGAWA F3LP32-0N, User Manual

Page: 27 / 104

2-3
IM 34M06H43-02E 2nd Edition : Sep.30, 2019-00
2.5 Link Data Specifications
2.5.1 Link Devices Specifications of the module
Table 2.5.1 Link Device Specifications by Operation Mode
Item
Normal Mode High-Speed Mode
Link Relay Link Register Link Relay Link Register
Maximum number of link
devices per system
2048 2048 1024 1024
Maximum number of link
devices that one module in a
system can transmit
Note
- The specifications of link devices are the same between F3LP32-0N and
F3LP02-0N.
- The same operation mode must be set for all modules in a link system. For
details, see “■ Operation Mode ” in Chapter 5, “Cautions on Using”.
- If you configure a system with multiple link systems, see “
■
Restrictions on
Mixing Modes (Normal and High-speed) in Link Systems” in Chapter 5,
“Cautions on Using”.
When assigning link devices (that is, setting link device ranges for which specified
stations transmit), the criteria shown in the table below must be satisfied. Link data
cannot be written to a stations whose the top address and size area are not set, or
to stations whose size is set to 0. These stations become read-only station.
Table 2.5.2 Criteria for Setting Values
Item Normal Mode High Speed Mode
Link Relay Link Register Link Relay Link Register
Top Address L0001 to L2033
On 16-point basis *1
W0001 to W2048
On 1-point basis
L0001 to L1009
On 16-point basis *1
W0001 to W1024
On 1-point basis
Size 0 to 2048 points
On 16-point basis *2
0 to 2048 points
On 1-point basis
0 to 1024 points
On 16-point basis *2
0 to 1024 points
On 1-point basis
*1: Specify a 16-point basis value, such as L0001, L0017, or L0033.
*2: Specify a 16-point basis value, such as 0, 16, or 32.