8
IM 701510-01E
Conventions Used in this Manual
Unit
k ............. Denotes “1000”. Example: 100kS/s
K ............. Denotes “1024” or “1002”.
• Example of when K indicates “1024” : 640 KB (storage capacity of a floppy
disk)
• Example of when K indicates “1002” : 100 KW (record length for
acquisition memory)
Used Characters
Alphanumerics enclosed in double quotation marks usually refer to characters and set values
that appear on the screen and panel.
The SHIFT + xxx key refers to first pressing the SHIFT key (the indicator above the SHIFT
key lights), and then pressing the xxx key to obtain another, specified, function.
Symbols Used
The following symbol marks are used in this User's Manual.
To avoid injury or death of personnel, or damage to the
instrument, the operator must refer to the User's Manual. In the
User's Manual, these symbols appear on the pages to which the
operator must refer.
Describes precautions that should be observed to prevent the
danger of serious injury or death to the user.
Describes precautions that should be observed to prevent the
danger of minor or moderate injury to the user, or the damage to
the property.
Note
Provides information that is important for proper operation of the
instrument.
Symbol Marks Used for Descriptions of Operations
The following symbol marks are used in Chapters 3 to 14 to distinguish certain features in
descriptions.
Relevant Keys
Indicates the relevant panel key which are necessary
to carry out the operation.
Operating Procedure
Carry out steps in the order shown. The operating
procedures are given with the assumption that you are
not familiar with the operation. Thus, it may not be
necessary to carry out all the steps when changing
settings.
Keys and Procedure
Shows the above mentioned relevant keys and the
operating procedure in one block.
Explanation
Describes settings and restrictions relating to the
operation. A detailed description of the function is not
provided. For a detailed description of the function,
refer to Chapter 1.
WARNING
CAUTION
