8-1
IM 701510-01E
Analyzing W
aveforms
8
8.1
Measuring a V-T Waveform using Cursors
1.
Press the
CURSOR key
to display the cursor measurement setting
menu.
2.
Press the “
Cursor
” soft key and select “
ON
”.
3.
Press the “
Type
” soft key to display the measurement type selection
menu.
Measuring time difference/ frequency/ voltage/ voltage
difference using the vertical cursors
4.
Press the “
V-T
” soft key to display the cursor selection menu. Two
vertical cursors will appear on the screen.
5.
Press the “
Trace
” soft key to display the trace selection menu.
6.
Press the soft key corresponding to the trace you want to measure.
For DL1520/DL1520L, menus such as “
1
”, “
2
”, “
MATH
”, “
LOAD1
”,
“
LOAD2
” and “
ALL
” are displayed instead of the trace selection menu shown
below.
7.
After having pressed any of the “
T1
”, “
T2
” or “
T1&T2
” soft keys, use
the rotary knob to adjust the position of the cursor.
Measuring only the time difference using the vertical cursors
4.
After step 3 has been completed, press the “
dT
” soft key to display the
cursor selection menu. Two vertical cursors will appear on the screen.
5.
After having pressed any of the “
T1
”, “
T2
” or “
T1&T2
” soft keys, use
the rotary knob to adjust the position of the cursor.
Measuring only the voltage difference using the horizontal
cursors
4.
After step 3 has been completed, press the “
dV
” soft key to display the
cursor selection menu. Two horizontal cursors will appear on the
screen.
5.
Press the “
Trace
” soft key to display the trace selection menu.
Keys and Procedure
CURSOR key
Rotary knob
Soft keys
<, > keys
