10-5
IM 701510-01E
Outputting Displayed W
aveforms and
Setting Parameters to the Printer/Plotter
10
LONG (long copy)
Select this type of output if you want to output normal waveforms on screen as expanded
waveforms. The following settings must be made.
• Setting the printing range; Sets from where to where printing will be done. 10div of the
time axis will be printed on one page. A printout page will always be filled up to 10div,
and therefore more of the waveform might be printed than specified by the printing
range.
• Setting the expansion rate; For setting limits and expansion rate, refer to page x.x This
setting is not necessary if expanded waveforms have already been displayed before the
hardcopy output setting menu is displayed and you do not want to change the expansion
rate.
1 page
Number of pages
After having selected the long copy and having closed the hard copy setting menu, the
display will still be according to the MainZoom display mode. To display normal
waveforms only, press the ZOOM key and select OFF or MAIN.
Note
The printer density can be adjusted. For more details, refer to page 14-4.
10.2
Printing Waveforms and Additional Information using the Optional Built-in Printer
