Yingang YG48Q-5A, Maintenance Manual

Page: 78 / 144

YG48Q-5AMaintenance ManualMagneto and starting system
86
Notice:
Never let adhere to the left crank conical surface and
rotor tapered surface.
The disk gear shall only be capable of rotating
clockwise flexibly relative to the rotor.
Use the thread retaining adhesive LOCTITE 648 while
assembling the pressure plate bolt.
Warning
Thread retaining adhesive LOCTITE243 must be
applied to the rotor retaining nut M12 while
assembling, with the tightening torque being 45N.m.
Check
1. Check the wear of the starting chain and check the
wear of the chain wheel of the starting motor;
2. Check the tooth surface wear of the starting sprocket;
3.Check the outer diameter of the mounting column of the
clutch
， limit≥37.97mm ；
4
、
When assembling the starting motor, rotate the rotor
assembly to confirm the rotation is flexible. Limit the rotor
assembly, only turn the starting sprocket, and determine
that the starting sprocket can only turn clockwise