Yingang YG48Q-5A, Maintenance Manual

Page: 76 / 144

YG48Q-5AMaintenance ManualMagneto and starting system
84
Disassembly and assembly of rotor assembly
Disassemble and assemble the rotor assembly according to the following diagram.
Use thread retaining adhesive LOCTITE 648 on the screw while assembling, with the tightening torque being
（
10-14
）
N.m
No Procedure Quantity Remarks
Removing order Installation is in the reverse order of removal
1 FLYWHEEL 1
2 NUTM10×1.25 1
3 STATOR, COMP 1
4 WIRE CLIP 1
5 SCREW M5×8 1
6 BOLT M6×25 1
7 BOLT M6×16 1
8 WIRE CLIP 1
9 SCREW M5×16 1
10 WASHER
φ5
1
11
SPROCKET,DRIVEN,SELF-ST
ARTER
1
12 DRIVE CHAINSELF-STARTER 1
13 OIL SEAL 18.9×30×5 1
14 BOLT M6×12 1
15 PLATE, FIXED 1
16 PLATE GUIDE, SPROCKET 1
17 TENTIONER PLATE 1