Yingang YG48Q-5A, Maintenance Manual

Page: 74 / 144

YG48Q-5AMaintenance ManualMagneto and starting system
83
Disassembly and assembly of left front cover
Disassemble and assemble the left front cover according to the following diagram.
Use the thread retaining adhesive LOCTITE 648 while assembling the pressure plate bolt.
Use the thread retaining adhesive LOCTITE 648 while assembling the magneto stator connecting bolt.

In case of O-ring aging, prolonging or deforming, replace it.
Notice:
Do not dent the seal surface, and do not damage the stator coil.
No Procedure Quantity Remarks
Removing order Installation is in the reverse order of removal
1 FLYWHEEL 1
2 NUT M10×1.25 1 Replace it with a new one as required
3 STATOR, COMP. 1
4 WIRE CLIP 1
5 SCREW M5×8 1
6 BOLT M6×25 1
7 BOLT M6×16 1
8 WIRE CLIP 1
9 SCREW M5×16 1
10 WASHER
φ5
1