Yingang YG48Q-5A, Maintenance Manual

Page: 66 / 144

YG48Q-5AMaintenance ManualClutch and Right crankcase cover
74
Clutch
To remove the clutch:
1.
Remove the right crankcase cover (See “Removal
of right crankcase cover").
2. Remove the clutch push rod with the clutch push
rod extractor.
3. Use the fastening tool to clamp the primary
driving and driven gear, and remove the nut M18
and butterfly washer.
4. Remove the clutch.
5. Remove the clutch washer.
To install the clutch:
1. Mount the clutch washer with the sabotage side
facing the main shaft right bearing.
2. Mount the clutch.
3. Mount the butterfly washer and retaining nut M18.
Note to assemble with the protruding side of the
butterfly nut washer facing outside.
4. Use the fastening tool to clamp the primary driving
and driven gear, and screw up the retaining nut M18
to the tightening torque of 120N.m.
Nut
Washer