Yealink SIP-T32G Page 74 User Manual Download

Page: 74 / 118

User Guide for the SIP-T32G IP Phone

You can also configure call completion via web user interface at the path
Phone->Features->General Information.

To use call completion:

When the called party is busy, the following prompt will appear on the LCD screen of the
phone:

Press the OK soft key, the phone returns to the idle screen and call completion is
activated.

When the called party becomes idle, the following prompt appears on the LCD
screen of the phone:

Press the OK soft key to redial the number.

Note

You can press a call return key to place a call back to the last incoming call.

To configure a call return key via phone user interface:

Press Menu->Features->DSS Keys.

Select a desired DSS key.

Press or , or the Switch soft key to select Key Event from the Type field.

The call completion feature is not available on all servers. For more information, contact
your system administrator.

Summary of Contents for SIP-T32G























































































































Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands

Yealink SIP-T32G, User Manual

Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands