Yealink SIP-T32G User Manual Download

Page: 89 / 118

Basic Call Features

You can use anonymous call feature to block the identity and phone number from
showing up to the called party when you call someone. For example, you want to call to
consult some of the services, but you don’t want to be harassed.

Note

To configure anonymous call via phone user interface:

Press Menu->Features->Anonymous Call.

Press or , or the Switch soft key to select the desired line from the Line ID
field.

Press or , or the Switch soft key to select Enable from the Anonymous Call
field.

(Optional.) Enter the anonymous call on code in the Call On Code field.

(Optional.) Enter the anonymous call off code in the Call Off Code field.

Press the Save soft key to accept the change or the Back soft key to cancel.

You can also configure anonymous call via web user interface at the path
Account->Basic.

To place an anonymous call:

Using the specific line on the phone to place a call to phone B.

The LCD screen of phone B prompts an incoming call from anonymity.

The anonymous call feature is not available on all servers. Contact your system
administrator for the anonymous call on code and off code.

Summary of Contents for SIP-T32G























































































































Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands

Yealink SIP-T32G, User Manual

Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands