Yealink SIP-T32G Page 66 User Manual Download | Manualshive

Page: 66 / 118

background image

User Guide for the SIP-T32G IP Phone

56

2.

Click the “+” sign on the left of the General Information to expand the feature list.

3.

Select Enabled from the pull-down list of Live Dialpad.

4.

Enter the desired delay time (0~14s) in the Inter Digit Time (1~14) (seconds) field.

5.

Click Confirm to accept the change.

Note

You can dial a hotline number immediately once you lift the handset, press the
speakerphone key or press a line key. You can also configure a period of delay time to
dial out the hotline number, the phone will dial out the hotline number automatically
after the specified delay time.

To configure the hotline number via phone user interface:

1.

Press Menu->Features->Hotline.

2.

Enter the desired number in the Hotline field.

3.

Enter the delay time (in seconds) in the Hotline Time-out field.

4.

Press the Save soft key to accept the change or the Back soft key to cancel.

You can also configure hotline via web user interface at the path
Phone->Features->General Information.

The default delay time of live dialpad feature is 4s.

You can configure live dialpad via web user interface only.

«
...
64
65
66
67
68
...
»

Summary of Contents for SIP-T32G























































































































Reviews:

No comments

Related manuals for SIP-T32G

Brand: Garmin Pages: 20

Brand: Garmin Pages: 20

Brand: Garmin Pages: 32

Brand: Garmin Pages: 12

Garmin-Asus A10

Brand: Garmin Pages: 20

Brand: Unitech Pages: 72

Brand: TECNO MOBILE LIMITED Pages: 6

Brand: Audiovox Pages: 44

Brand: Sagem Pages: 72

Brand: Blu Pages: 54

Brand: Quba Pages: 64

ON-AIR 2000 EXECUTIVE

Brand: BT Pages: 25

Brand: RugGear Pages: 31

Brand: DSC Pages: 20

MultiPhone PAP4505DUO

Brand: Prestigio Pages: 4

Brand: Infinix Pages: 30

Brand: Lenovo Pages: 33

Brand: Lenovo Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands