Yealink SIP-T32G User Manual Download | Manualshive

Page: 113 / 118

background image

Regulatory Notices

103

Contact your Yealink Authorized Reseller for information about service agreements

applicable to your product.

TO THE FULL EXTENT ALLOWED BY LAW, YEALINK EXCLUDES FOR ITSELFAND ITS
SUPPLIERS ANY LIABILITY,  WHETHER BASED IN CONTRACT OR TORT
(INCLUDINGNEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT,  SPECIAL,
OR PUNITIVE DAMAGES OFANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS
OF BUSINESS,  LOSS OF INFORMATION ORDATA, OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE SALE,INSTALLATION,  MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS,EVEN IF YEALINK OR ITS
AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY  OF SUCHAMAGES,
AND LIMITS ITS  LIABILITY TO REPAIR,  REPLACEMENT, OR REFUND OF THE
PURCHASERICE PAID, AT YEALINK’S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BEAFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF
ITS ESSENTIAL PURPOSE.

Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce risk of fire,

electrical shock, and other personal injury.

General Requirements



Before you install and use the device, read the safety instructions carefully
and observe the situation during operation.



During the process of storage, transportation, and operation, please always
keep the device dry and clean.



During the process of storage, transportation, and operation, please avoid
collision and crash of the device.



Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.



Without prior written consent, no organization or individual is permitted to
make any change to the structure or the safety design of the device. Yealink
is under no circumstance liable to consequences or legal issues caused by
such changes.



Please refer to the relevant laws and statutes while using the device. Legal
rights of others should be respected as well.

Environmental Requirements



Place the device at a well-ventilated place. Do not expose the device under
direct sunlight.

«
...
111
112
113
114
115
...
»

Summary of Contents for SIP-T32G























































































































Reviews:

No comments

Related manuals for SIP-T32G

Brand: Panasonic Pages: 45

Brand: Yealink Pages: 4

Brand: Yealink Pages: 148

Brand: Yealink Pages: 2

Brand: Yealink Pages: 131

Brand: Yealink Pages: 159

Brand: Yealink Pages: 9

Brand: Sony Ericsson Pages: 74

Brand: Ole Pages: 34

Brand: HTC Pages: 58

Brand: Maxcom Pages: 109

Vogue 2.8a SLEEC

Brand: iBall Pages: 23

Brand: HTC Pages: 240

Brand: iBall Pages: 80

ON-AIR 2000 EXECUTIVE

Brand: BT Pages: 25

Brand: ORA Pages: 26

Brand: WOO Pages: 11

Brand: Blackberry Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands