Yealink SIP-T32G User Manual Download

Page: 37 / 118

Customizing Your Phone

To unlock the keypad lock via phone user interface:

Press any locked key, the LCD screen prompts “Please Enter PIN:”.

Enter the PIN (default PIN: 123).

Press the Confirm soft key to unlock the keypad.

The icon disappears from the LCD screen.

You can long press to lock the keypad again.

To deactivate the keypad lock via phone user interface:

Press Menu->Setting->Advanced Settings (password: admin) ->Phone
Setting->Lock.

Press or , or the Switch soft key to select Disabled from the Keypad Lock
field.

Press the Save soft key to accept the change.

You can also activate or deactivate the keypad lock via web user interface at the path
Phone->Features->Phone Lock.

Note

The default  PIN for unlock is 123, you can also unlock the keypad  by administrator
password.  When you enter the administrator  password  to unlock the keypad,  the phone
will then turn  to the Ch ange PIN interface.

Summary of Contents for SIP-T32G























































































































Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands

Yealink SIP-T32G, User Manual

Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands