Yealink SIP-T32G Page 57 User Manual Download

Page: 57 / 118

Customizing Your Phone

Label (key label displays on the LCD screen)

Usage: Press the DSS key to access the BroadSoft group specified in the BroadSoft
Name field.

Conference

You can use this key feature to set up a conference call. For more information, refer to

Conference

on page

Dependencies:

Type (Key Event)

Key Type (Conf)

Label (key label displays on the LCD screen)

Usage: Press the DSS key during an active call to set up a conference with the number
specified in the Value field.

Forward

You can use this key feature to forward an incoming call to someone else. For more
information, refer to

Call Forward

on page

Dependencies:

Type (Key Event)

Key Type (Forward)

Label (key label displays on the LCD screen)

Value (the number you want to forward to)

Usage: Press the DSS key to forward an incoming call to the number specified in the
Value field.

Note

Transfer

You can use this key feature to handle the call differently depending on the transfer
mode on DSS key when there is an active call on the phone.

Dependencies:

Type (Key Event)

Key Type (Transfer)

Label (key label displays on the LCD screen)

Value (the number you want to transfer to)

Usage:



When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete
the blind transfer to the number specified in the Value field.



When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial
out the number specified in the Value field, and then you can perform the attended
or semi-attended transfer.



When the transfer mode on DSS key is New Call, press the DSS key, the number

When leaving the Value field blank, the DSS key performs the same as the Forward soft

key when receiving an incoming call.

Summary of Contents for SIP-T32G























































































































Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands

Yealink SIP-T32G, User Manual

Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands