Yealink SIP-T32G User Manual Download

Page: 55 / 118

Customizing Your Phone

Account ID (the account this feature will be applied to)

Label (key label displays on the LCD screen)

Value (the group pickup feature code)

Usage: Press the DSS key on your phone when a phone number in the group receives
an incoming call. The call is answered on your phone.

DTMF

You can use this key feature to send the specification of arbitrary key sequences via
DTMF.

Dependencies:

Type (Key Event)

Key Type (DTMF)

Label (key label displays on the LCD screen)

Value (DTMF sequence)

Note

Usage: Press the DSS key during an active call to send the key sequence specified in the
Value field.

Prefix

You can use this key feature to add a specified prefix number before the dialed number.

Dependencies:

Type (Key Event)

Key Type (Prefix)

Label (key label displays on the LCD screen)

Value (the prefix number)

Usage: Press the DSS key when the phone is idle, the phone enters into the dialing
screen and displays the prefix number which you specified in the Value field, enter other
digits and then dial out.

Local Group

You can use this key feature to access the contact group in the local directory quickly.
For more information, refer to

Local Directory

on page

Dependencies:

Type (Key Event)

Key Type (Local Group)

Local Group (the contact group name you want to access)

Label (key label displays on the LCD screen)

Usage: Press the DSS key to access the contact group specified in the Local Group field.

XML Phone Book

You can use this key feature to access the remote group in your corporate directory

DTMF sequence is allowed to be: "0-9", "*", "#" and "A-D".

Summary of Contents for SIP-T32G























































































































Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands

Yealink SIP-T32G, User Manual

Search results

Summary of Contents for SIP-T32G

Reviews:

Related manuals for SIP-T32G

Brands by name

Popular brands