manualshive.com logo in svg

Yealink MeetingSpace VC200, Administrator'S Manual

Introducing the Yealink MeetingSpace VC200, a cutting-edge video conferencing solution. Setting up and managing this powerful device is a breeze with the comprehensive Administrator's Manual. To unlock the full potential of your VC200, easily download the free manual from our website, manualshive.com, and dive into a seamless conferencing experience.

Share
Download
background image

 | Getting Started | 

35

LED Status

Description

Fast flashing red 3

times and then off

The battery capacity is too low to turn on the CPW90-BT.

Slowly flashing red

The battery capacity is less than 10%.

Off

If you tap the mute button and the power indicator LED on the CPW90-BT is still

off, it means the CPW90-BT is powered off.

Mute Indicator LED

LED Status

Description

Slowly flashing

yellow

The CPW90-BT is searching for signal.

Fast flashing yellow

The CPW90-BT is in the pairing mode.

Solid red

The system is muted.

Solid green

The system can pick voice.

Slowly flashing red

The system is receiving an incoming call.

Flashing red and green

alternately

The VCS is searching for the CPW90-BT which has registered with it.

Off

The CPW90-BT is in the idle mode.

LED Instructions of WPP20 Wireless Presentation Pod

LED Status

Description

The WPP20 is starting up.
The WPP20 is trying to pair to the video conferencing system.
The WPP20 is plugged into the video conferencing system, and firmware update is in

progress.

Fast flashing green

The WPP20 is plugged into the video conferencing system, and the WPP20 is updating

Wi-Fi profile.

Slowly flashing

green

The WPP20 pairs to the video conferencing system successfully, but you are not sharing

content.
The WPP20 pairs to the video conferencing system successfully, and you are sharing

content.
Firmware update is done.

Solid green

Wi-Fi profile update is done.
The WPP20 cannot find or connect to the video conferencing system in 10 seconds after

start-up.
The WPP20 pairs to the video conferencing system successfully, but it does not detect

that the Yealink Wireless Presentation Pod software is running on your PC.
Yealink Wireless Presentation Pod software is turned off.

Slowly flashing

red

Firmware update fails.

Summary of Contents for MeetingSpace VC200









































































































































































































































Reviews:

No comments

Related manuals for MeetingSpace VC200

SAI Connect Operation Manual preview
Connect
Brand: SAI Pages: 16
Racal Instruments 1266 Manual preview
1266
Brand: Racal Instruments Pages: 64
Pilz PSS67 IO1 16FDI Operating Manual preview
PSS67 IO1 16FDI
Brand: Pilz Pages: 36
Polycom RealPresence Digital Brkout User Manual preview
RealPresence Digital Brkout
Brand: Polycom Pages: 2
Wachs Vitals Reference Manual preview
Vitals
Brand: Wachs Pages: 224
Rath JANUS SmartView Installation & Operation Manual preview
JANUS SmartView
Brand: Rath Pages: 8
Clas Ohlson 18-8175 Instruction Manual preview
18-8175
Brand: Clas Ohlson Pages: 36
Carbide 3D Shapeoko XL Assembly Manual preview
Shapeoko XL
Brand: Carbide 3D Pages: 34
mr. steam iGenie 104129 Installation And Operation Instructions preview
iGenie 104129
Brand: mr. steam Pages: 4
Valcom VL-CONF-4 Quick Start Manual preview
VL-CONF-4
Brand: Valcom Pages: 6
InnoMedia InfoView IV 2000 Operating Manual preview
InfoView IV 2000
Brand: InnoMedia Pages: 50
Allmatic BEVLB 24V Installation Manual preview
BEVLB 24V
Brand: Allmatic Pages: 32
RCA RS-1249 User Manual preview
RS-1249
Brand: RCA Pages: 28
Emerson TraxOil OM3-020P Operating Instructions preview
TraxOil OM3-020P
Brand: Emerson Pages: 3
Emerson M11S-S Installation, Operation And Maintenance Manual preview
M11S-S
Brand: Emerson Pages: 15
Emerson White Rodgers 50A65-5165 Installation Instructions Manual preview
White Rodgers 50A65-5165
Brand: Emerson Pages: 8
Emerson TESCOM ERNG-X Instruction Manual preview
TESCOM ERNG-X
Brand: Emerson Pages: 14
Emerson PACSystems User Manual preview
PACSystems
Brand: Emerson Pages: 47

Brands by name

Popular brands

Load more brands