manualshive.com logo in svg

Yealink MeetingSpace VC200, Administrator'S Manual, Page: 124 / 232

Share
Download
Yealink MeetingSpace VC200 Administrator'S Manual Download Page 124

 | Configuring the Audio Settings | 

124

Media Audio Input

When the VCS device is connected to both a microphone and other media audio inputs (such as connected to a

computer to play audio), you need to configure the type of media audio input, so that the mix input can be realized.

The sound from the media audio input device is mixed to the local output by default and can be mixed to the remote

output. This feature is not applicable to VP59.

Note: 

 If the microphone is connected to the device via Line Input or USB to Line Input, you should not

select the interface to which the microphone is connected when using the media audio input, otherwise there

may be a strident sound.

•

Configuring Media Audio Input

Configuring Media Audio Input

Procedure

1.

Do one of the following:
• On your web user interface, go to 

Setting

 > 

Video & Audio

 > 

Audio Settings

 > 

Media Audio Input

.

• On your VCS:

For VC880/VC800/VC500/PVT980/PVT950, go to 

More

 > 

Setting

 > 

Video & Audio

 > 

Audio Settings

 >

Media Audio Input

.

On your VC200, go to 

More

 > 

Setting

 > 

Video & Audio

 > 

Media Audio Input

.

• On your CTP20, tap 

Setting

 > 

Audio

 > 

Media Audio Input

.

2.

Configure and save the following settings:

Parameter

Description

Configuration Method

Media Audio Input

Specify the media audio input

connected to the device.
The supported types are as

follows:
•

Off

- not use any media audio

input.

•

Line Input (No access)

- the

media audio input device

connected to RCA In port on

VC880 or to the Line In port

on VC800.

•

USB to Line Input (No

access)

- the media audio

input device connected to

the USB port on VC500/

VC200 via a USB to line

input adapter.

Default

: Off.

Web user interface
Endpoint
CTP20

EQ Self-Adaption

The EQ self-adaption allows the device to optimize the acoustic effect.

Summary of Contents for MeetingSpace VC200









































































































































































































































Reviews:

No comments