Gigabit Color IP Phone Using the Basic Call Functions
- 96 -
During an Active Call
Mute
This function allows you to mute the microphone of the active audio device during a call;
you cannot be heard by the other party. You can still hear all other parties while mute
is enabled. When you press the X button during the conversation will be muted.
To mute/resume a conversation:
Press X button during a conversation, the icon
will be shown in the LCD. Press it
again to get the microphone return to normal conversation.
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/retrieve a call:
1)
Press the Hold soft key to put your active call on hold.
2)
During the call, there will be a "dodo...” sound for each 30 second, suggesting that
there is a current call in Hold state.
3)
If there is only one call on hold, press the Resume soft key or Hold soft key to
retrieve the call.
4)
If there are more than one call on hold, press the SWAP soft key to switch the
conversation.
5)
If you want to hold all the call, you can press the line key which you set as Hold. And
then press the Up/Down navigation key to highlight the call, press the
corresponding line key which set as Hold to retrieve the call. You can also press the
line key to establish a new call and then all the call will be held.
Summary of Contents for Gigabit Color
Page 5: ...4 Zero sp touch 119 Voice 119 Ring 120 Tone Settings 121 Trouble Shooting 123 ...
Page 17: ...Gigabit Color IP Phone Overview 16 Set as XML Group function ...
Page 21: ...Gigabit Color IP Phone Overview 20 4 And then choose the specific one to check ...