Gigabit Color IP Phone Using the Advanced Phone Functions
- 103 -
Enable LLDP function; the phone will go to switch to get related VLAN parameters
automatically. (Synchronous with VLAN in switch)
To configure LLDP settings via Web interface:
1)
Choose Network->Advanced->LLDP->Active option, in the pull-down menu,
choose enable or disable this function.
2)
Then enter the corresponding Packet Interval in Packet Interval field.
3)
Choose enable or disable to Overwrite Network option.
4)
Click the Confirm button to save the change.
Maintenance Tasks
Administrator Mode
The phone allows two modes to configure the phone:
User Mode
Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both Web
and Phone interface. User Mode cannot set the following options: Advance settings of
accounts, Advance settings of Network, Reset to Factory, and other advanced phone
settings.
To logout via Web interface:
Summary of Contents for Gigabit Color
Page 5: ...4 Zero sp touch 119 Voice 119 Ring 120 Tone Settings 121 Trouble Shooting 123 ...
Page 17: ...Gigabit Color IP Phone Overview 16 Set as XML Group function ...
Page 21: ...Gigabit Color IP Phone Overview 20 4 And then choose the specific one to check ...
