Yealink Gigabit Color User Manual Download Page 103

Page: 103 / 125

Gigabit Color IP Phone Using the Advanced Phone Functions

- 102 -

DNS-SRV

If the SIP server cannot be used, the phone will be connected the server which is
available.

To set DNS-SRV via web interface:
1)

Go to Account->Basic.

Choose Transport option, in the pull-down menu, you can choose the DNS-SRV
option.

Click the Confirm button to save the change.

Network Setting

Please refer to the previous part “

Network

” for more information about the WAN Port,

PC Port, and VLAN etc.

LLDP

The Link Layer Discovery Protocol (LLDP) is a vendor-neutral Layer 2 protocol that
allows a network device to advertise its identity and capabilities on the local network.

Summary of Contents for Gigabit Color






























































































































Search results

Summary of Contents for Gigabit Color

Reviews:

Related manuals for Gigabit Color

Brands by name

Popular brands

Yealink Gigabit Color, User Manual

Search results

Summary of Contents for Gigabit Color

Reviews:

Related manuals for Gigabit Color

Brands by name

Popular brands