Yealink Gigabit Color User Manual Download

Page: 69 / 125

Gigabit Color IP Phone Customizing Your Phone

- 68 -

Note:

1. The default password for unlock is

admin

Reset to factory

You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider’s advice.

To reset to factory via phone interface:
1)

Press Menu->Setting->Advanced Settings.

You are prompted to enter the required password, scroll to Reset to factory, press
Enter soft key.

You are prompted to confirm the change, press OK soft key to reset to factory
settings, press Cancel soft key to return to previous menu.

It will take a few minutes to reset, please do not power off during resetting, or it will
cause flash memory error.

Summary of Contents for Gigabit Color






























































































































Search results

Summary of Contents for Gigabit Color

Reviews:

Related manuals for Gigabit Color

Brands by name

Popular brands

Yealink Gigabit Color, User Manual

Search results

Summary of Contents for Gigabit Color

Reviews:

Related manuals for Gigabit Color

Brands by name

Popular brands