VS-616PS5 Installation & Quick Start Manual
29
Parameter Entry
When power is applied, the display defaults to the reference setting:
P 00.00
Press the
key to access the parameters.
A1-01
is displayed.
Press the
key to display the value. The default is:
0
002
The first 0 will be blinking. This is the value for access to the Quick Start parameters.
We want to keep this value, so press to go back to:
A1-01
Press the key to go to the next parameter:
A1-03
.
Press the
key to display the value. The default is:
0
000
We want to enter 3330 for 3-wire operation. The first zero will be blinking.
Press the key three times to change the first number to 3.
Now the display will show:
3000
with the 3 blinking.
Press the key to go to the next digit. Now the second digit is blinking.
Press the key three times to change the second number to 3:
3
3
00
Use the and keys to change the third digit to 3:
33
3
0
Press the key to enter the number. Press the key to return to
A1-03
Press the key to return to the reference entry (normal) mode.
The display is now ready for a speed reference entry:
P
0
0.00
The digit to be changed is blinking.
Use the , , , and keys to set the desired reference in percent speed.
Press the key to see the speed display.
DRIVE
PRGM
DATA
ENTER
DISPL
DATA
ENTER
DATA
ENTER
DISPL
DRIVE
PRGM
DATA
ENTER
DISPL
