YASKAWA
TOEP YAICOM 22A BACnet MS/TP Installation & Technical Manual
27
A - Ground wire
B - Included screw
C - Crimp terminal
Figure 5.14 Connect the Ground Wire
7.
Firmly connect the BACnet communication cable to terminal block (TB1).
Isolate communication cables from main circuit wiring and other electrical and
power lines. Make sure that you firmly connect the cable end. Refer to
Communication Cable Topology on page 30
for more information.
8.
Reattach the drive front cover (A) and the keypad (B).
Refer to the drive manuals for more information.
NOTICE
Do not pinch cables between the front covers and the drive. Failure to
comply could cause erroneous operation.
B
A
C
