YASKAWA FSDrive-MV1S, Instructions Manual

Page: 48 / 220

Modes
3-
5
‹
Switching Modes
The mode selection display will appear when the MENU Key is pressed from a monitor or setting display.
Press the MENU Key from the mode selection display to switch between the modes.
Press the DATA/ENTER Key from the mode selection key to monitor data and from a monitor display to
access the setting display.
Fig 3.2 Mode Transitions
When running the Inverter after using Digital Operator, press the MENU Key to select the drive mode (dis-
played on the LCD screen) and then press the DATA/ENTER Key from the drive mode display to bring up the
monitor display. Run commands can not be received from any other display. (Monitor display in the drive
mode will appear when the power is turned on.)
U1-02=60.00Hz
U1-03=10.1A
-DRIVE- Rdy
Frequency Ref
Display at Startup
MENU
DATA
ENTER
RESET
Operation
INV * MODE sel *
-DRIVE-
U1-02=60.00Hz
U1-03=10.1A
-DRIVE- Rdy
Monitor
U1 -01=100.00%
U1-02=60.00Hz
U1-03=10.1A
-DRIVE- Rdy
Frequency Ref
ESC
(0.00 to 100.00)
“0.00%”
-DRIVE- Rdy
Frequency Ref
ESC
DATA
ENTER
Monitor Display
ESC
Mode Selection
Display
Quick Setting
INV * MODE sel *
-QUICK-
Programming
INV * MODE sel *
-ADV-
Tuning Mode
INV * MODE sel *
-A TUNE-
Setting Display
MENU
MENU
MENU
DATA
ENTER
ESC ESC
A1-02=2
*2*
IM VEC. PG-Less
Control Method
-QUICK-
IM VEC. PG-Less
Control Method
-QUICK-
ESC ESC
Access Level
Initialization
-ADV-
RESET
ESC
(0 to 9999)
“2"
-ADV-
Access Level
(0 to 9999)
“2”
-ADV-
Access Level
ESC
Motor Setup (REV)
“0”
-A TUNE-
Tuning Mode Sel
Motor Setup (REV)
“0”
-A TUNE-
Tuning Mode Sel
ESC
DATA
ENTER
DATA
ENTER
DATA
ENTER
DATA
ENTER
DATA
ENTER
DATA
ENTER
Fault History
INV * MODE sel *
MENU
ESC
Weak Battery
03/07 01:28:45
001 A BAT
Fault History
DATA
ENTER
DATA
ENTER
U1- 01 =100.00%
A1 -01=2
T1- 01 =0 *0*
A1- 01 =2
U1- 01 =100.00%
U1-01=1 0 0.00%
A1-02= 2
*2*
A1-01= 0 002
T1-01= 0 *0*