Modes
3-
7
Quick Programming Mode
In quick programming mode, the constants required for Inverter trial operation can be monitored and set.
Constants can be changed from the setting displays. Use the Increment, Decrement, and Shift/RESET Keys to
change the frequency. The user constant will be written and the monitor display will be returned to when the
DATA/ENTER Key is pressed after changing the setting.
Refer to
Chapter 5 User Constants
for details on the constants displayed in quick programming mode.
Example Operations
Key operations in quick programming mode are shown in the following figure.
Fig 3.4 Operations in Quick Programming Mode
MENU
Operation
INV * MODE sel *
-DRIVE-
Monitor Display
Mode Selection Display
Quick Setting
INV * MODE sel *
-QUICK-
Programming
INV * MODE sel *
-ADV-
Tuning Mode
INV * MODE sel *
-A TUNE-
Frequency Setting Display
MENU
A
B
A
B
MENU
MENU
ESC
IM VEC. PG-Less
“0”
A1-02=2
*2*
-QUICK-
Control Method
DATA
ENTER
IM VEC. PG-Less
“0”
*2*
-QUICK-
Control Method
ESC
DATA
ENTER
ESC
Terminals
“1”
b1-01=1
*1*
-QUICK-
Reference Source
DATA
ENTER
Terminals
“1”
*1*
-QUICK-
Reference Source
ESC
Terminals
“1”
b1-02=1
*1*
-QUICK-
Run Source
DATA
ENTER
Terminals
“1”
*1*
-QUICK-
Run Source
ESC
(0.0 to 1500.0)
“32.2A”
E2-03=32.2A
-QUICK-
No-Load Current
DATA
ENTER
(0.0 to 1500.0)
“32.2A”
-QUICK-
No-Load Current
Fault History
INV * MODE sel *
MENU
E2-03=
0
032.2A
b1-02=
1
b1-01=
1
A1-02=
2
