![background image](http://html1.mh-extra.com/html/yardline/braxton/braxton_assembly-manual_3175525081.webp)
79
SINGLE DOOR
FINISH
You have finished installing your single door.
PARTS REQUIRED:
Center door in wall panel opening.
Hold door in position and keep level.
4
Screw hinge boards into wall supports and floor using (5) 3" screws as shown.
Make sure screws go into framing and foor
(Fig. D, Fig. E)
.
3
2
3" (7,6 cm)
x5
3" (7,6 cm)
Screws into the wall
support and foor frame.
Measure Gap
(Fig. B)
between door trim and wall panel as shown.
Hold door in position and keep level.
Hinge-board must overhang wall panel at measurement shown
(Fig. C)
.
Bottom of door trim is even with wall panel as shown.
Angle 3" (7,6 cm)
Screw
Fig. E
Fig. D
Fig. C
3/8"
(1,0 cm)
3/8"
(1,0 cm)
Door trim e
ven
with pane
l.
Door
Frame
Flush
Carefully cut bottom wall frame 2 x 4 flush with door frame
using a saw
(Fig. A)
.
Be careful not to cut into floor panel!
5/8"
(1,6 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
x1
BEGIN
1
UNIVERSAL DOOR
Right
Fig. A
Fig. B