Two Nails
Two Nails
Panel
overhang
Fig. D
Panel 1/2"
(1,3 cm)
Rafter
Edge
Fig. E
52
ROOF PANELS
PARTS REQUIRED:
2" (5,1 cm)
x4
3/4"
GAUGE BLOCK
GAA
3/4"
(1,9 cm)
Gauge
Block
Fig. B
Place 2nd
47-7/8" x 39-3/4"
panel flush to the rafter marks. Panel should be a 1/2" from the outside edge of the
end rafter
(Fig. E)
.
Secure panel using (2) 2" nails in the corners as shown. Panel will overhang 6-1/2"
(Fig D)
.
4
5
Place 2nd
96" x 39-3/4"
roof panel flush to the rafter marks and flush to the installed panel.
Use the 3/4" gauge block
GAA
to center panel over the rafter
(Fig B)
.
Secure panel using (2) 2" nails in the corners. Panel will overhang 6-1/2"
(Fig D)
.
x1
39-3/4" x 96"
(101,0 x 243,8 cm)
x1
48" x 39-3/4"
(121,9 x 101,0 cm)