![background image](http://html1.mh-extra.com/html/yardline/braxton/braxton_assembly-manual_3175525010.webp)
8
Fig. A
Runners are generally
12" (30,5 cm) from
ends of foor frame
and under seams.
Measurements to
centers of 4x4's.
BEGIN
2
3
4
1
Use a level and check that the frame is level before applying floor panels.
Check for frame squareness by measuring diagonally across corners. If the measurements are the
same, the frame is square. The diagonal measurement will be approximately
322" (817,9 cm)
.
When the frame is level and square, secure one side of frame to the 4x4 runners using one
fastener at ends of each runner
(Fig. A)
.
At the opposite end of the frame, secure the frame to 4x4 runners using one fastener at ends of
each runner making sure the frame remains square
(Fig. A)
.
Once the floor frame is level and square,
fasten the frame at each point the frame contacts the 4x4 runners
(Fig. B)
.
See page 7 for the preferred floor leveling method.
FINISH
LEVEL AND SQUARE FLOOR FRAME
Before attaching floor decking, it is important to level and square the floor frame.
A level and square floor frame is required to correctly construct your shed.
(Floor frame and decking not included.)
•
3" Screws angled into 4x4.
•
(2) screws at each point of
the frame and where the
4x4's touch.
322"
(817,9 cm)
322"
(817,9 cm)
First, secure
at ends using
one fastener.
Second, secure at ends
using one fastener.
12"
(30,5 cm)
12"
(30,5 cm)
60"
(152,4 cm)
60"
(152,4 cm)
Fig. B