![background image](http://html1.mh-extra.com/html/yardline/braxton/braxton_assembly-manual_3175525053.webp)
Roof panels may cause serious injury until securely fastened.
Two Nails
11th
7th
3rd
Front
Back
Two Nails
Panel 1/2"
(1 cm)
Rafter
Edge
Fig. C
Panel
overhang
Fig. D
51
x4
ROOF PANELS
PARTS REQUIRED:
2" (5,1 cm)
x1
39-3/4" x 96"
(101,0 x 243,8 cm)
x1
48" x 39-3/4"
(121,9 x 101,0 cm)
Measure up 33-3/8" from the bottom of front, 3rd, 7th, 11th and back rafters. Mark a line across each rafter
(Fig A)
.
3/4"
GAUGE BLOCK
GAA
3/4"
(1,9 cm)
Gauge
Block
Fig. B
3/4"
(1,9 cm)
Gauge
Block
Fig. B
1
BEGIN
Place the
47-7/8" x 39-3/4"
panel flush to the rafter marks. Panel should be at 1/2" from the outside edge of the
first rafter
(Fig. C)
. Use the 3/4" gauge block
GAA
to center panel over the rafter
(Fig B)
.
Secure panel using (2) 2" nails in the corners as shown. Panel will overhang 6-1/2"
(Fig D)
.
3
2
Place 1st
96" x 39-3/4"
roof panel flush to the rafter marks and flush to the installed panel.
Use the 3/4" gauge block
GAA
to center panel over the rafter
(Fig B)
.
Secure panel using (2) 2" nails in the corners. Panel will overhang 6-1/2"
(Fig D)
.
Rafter Marks
Note: all roof panels need to be installed with the rough side up (painted grid lines).
33
-3
/8"
(84,8 cm)
Fig. A