![background image](http://html1.mh-extra.com/html/yardline/braxton/braxton_assembly-manual_3175525077.webp)
75
DOUBLE DOOR HARDWARE
FINISH
2
3
4
Place top bolt onto
OO
in open position with bolt ends 3/8" (1 cm) down from frame.
Bolt is open when loop is contacting base
(Fig A)
.
Mark and pre-drill holes for screws.
Install bolt using screws supplied and drill 5/16" (0,8 cm) hole deep enough
for bolt to slide into.
Place bottom bolt onto
OO
in open position with bolt ends 1/2" (1,3 cm) up from floor.
Bolt is open when loop is contacting base
(Fig B)
.
Mark and pre-drill holes for screws.
Install bolt using screws supplied and drill 5/16" (0,8 cm) hole deep enough
for bolt to slide into.
LEFT
DOOR
5/16" (0,8 cm) Drill Bit
PARTS REQUIRED:
HINT:
With door
closed extend bolt
and tap with hammer
to leave a mark in
wood for drilling.
1" (2,5 cm)
x2
x8
Fig. A
Fig. B
OO
OO
FLOOR
PRE-DRILL
(4) HOLES
PRE-DRILL
(4) HOLES
3/8" (1 cm)
1/2" (1,3 cm)
1-1/4 x 2-1/2 x 69"
5/16" (0,8 cm) drill for
bolt. 1" (2,5 cm) deep.
5/16" (0,8 cm) drill for
bolt. 1" (2,5 cm) deep.
OVER DOOR
FRAME
LOCATE AND PRE-DRILL HOLES
TO AVOID SPLITTING WOOD
OPEN POSITION
spring is loose.
OPEN POSITION
spring is loose.
Loop contacts
base.
Loop contacts
base.
x4
x4
with bolt
in open
position.
1-1/4 x 2-1/2 x 69"
BEGIN
1
You have finished installing
your Spring-Bolts.