74
PARTS REQUIRED:
DOUBLE DOOR HARDWARE
1-1/2" (3,8 cm)
x6
x1
Latch and
screws
BEGIN
1
Measure and mark both locations for door latch parts as shown. Pre-drill holes for screws
using an 1/8" drill bit.
Install door latch and strike plate as shown. Strike plate is flush to the outside edge of door (
Fig. A
).
2
39-1/2"
(100,3 cm)
Center
Flush
Center
Fig. A
You have finished installing your decorative door latch.
FINISH