![background image](http://html1.mh-extra.com/html/yardline/braxton/braxton_assembly-manual_3175525007.webp)
NOTE: When sill tape is used, there will be a visible 1/2" gap beneath the sill plate as well as under the door sill.
The 1/2" gap between the sill plate and the concrete will be visible after the siding is installed.
5
A
B
C
4"
(10,2 cm)
3-1/2"
(8,9 cm)
D
D
CONCRETE FOUNDATION
If you choose to install your kit on a concrete slab refer to the diagram below.
Attach the sill plates on the foundaton as shown, and continue on to page 13.
ALWAYS CHECK WITH LOCAL BUILDING CODES FOR CONCRETE SLABS
BEFORE BEGINNING CONCRETE FLOOR.
A
B
C
D
Actual Floor Size
Building Size
• A treated 2 x 4 (5,1 x 10,2 cm) sill plate is required when installing your shed on concrete.
Purchase full length treated lumber, or butt shorter pieces end-to-end and seal seams with caulk.
• Use a high quality exterior grade caulk beneath all sill plates or use sill tape.
• Fasten 2 x 4 (5,1 x 10,2 cm) sill plates to slab using approved concrete anchors (fasteners not included).
144" (365,8 cm)
281" (713,7 cm)
12'x 24' (365,8 x 609,6 cm)
12'x 24' (365,8 x 609,6 cm)
288" (731,5 cm)
322" (817,9 cm)
Treated Sill Plate
Sill Tape
between
sill plate and
concrete.
12' x 24' Building Requires:
2 x 4 x12' (5,1 x 10,2 x 365,8 cm)
x6
Sill plates MUST be treated lumber.
Caulk
x3
Allow new concrete slabs to cure for at least seven (7) days.
72' (21,9 m) Foam Sill Tape
DOUBLE
DOORS