OLT CB128-SLIDER-METAL-BEV Скачать руководство пользователя | Manualshive

Страница: 1 / 45

background image

Outdoor Living Today www.outdoorlivingtoday.com [email protected]

Page 1

Important Information:

- It is the sole responsibility of the customer to check with your local municipal or county by-laws before
ordering this product to confirm it complies with building codes in your area.
- If the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.

- Snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep
snow off roof frequently.
- In areas with high or gusty wind conditions, it is advisable to install the structure securely to the ground.
- Have a regular maintenance plan to ensure screws, doors, windows and parts are tightly affixed.
- All structures purchased from Outdoor Living Today are covered for a period of one year for defects in
manufacturing and workmanship. Costs incurred for customer installations are not included.
- Failure to use supplied parts included in this kit could result in poor product performance and may void
your warranty. Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from
our written instructions.

Thank you for purchasing a
12x8 Cabana. Please take
the time to identify all the
parts prior to assembly.

Version #1.0
September 28, 2023

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer Support Line
@ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our commitment to you to courier
replacement parts, free of charge, within 10 business days of this notification. Replacement parts will not be
provided free of charge after the 30 day grace period.

Stock Code:
CB128-SLIDER-METAL-BEV

Customer agrees to hold Outdoor Living Today and any Authorized Dealers free of any liability for improper
installation, maintenance and repair.

12x8 CABANA

SLIDER

WITH BEV SIDING & METAL

ROOF

1
2
3
...
»

Содержание CB128-SLIDER-METAL-BEV














































Отзывы:

Нет отзывов

Похожие инструкции для CB128-SLIDER-METAL-BEV

Бренд: Palmako Страницы: 50

Бренд: Palmako Страницы: 44

Бренд: Solid Страницы: 35

Бренд: Solid Страницы: 32

Бренд: Palmako Страницы: 55

Бренд: Kingfisher Страницы: 31

Бренд: Palmako Страницы: 44

Бренд: Palmako Страницы: 54

GS84-SLIDER-METAL-AK

Бренд: OLT Страницы: 38

Бренд: Palmako Страницы: 23

Seville FR19-3220-1FSC

Бренд: Palmako Страницы: 128

Бренд: Solid Страницы: 16

Lillevilla Peukaloinen

Бренд: Luoman Страницы: 48

Бренд: Shire Страницы: 4

Бренд: Sunjoy Страницы: 7

Бренд: Sunjoy Страницы: 8

Hanna PA44-4242

Бренд: Palmako Страницы: 92

Бренд: Lemeks Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды