manualshive.com logo in svg
background image

Outdoor Living Today                 www.outdoorlivingtoday.com            [email protected]

Page 1

8x4 SpaceSaver Garden Shed  

Bevel Model with Plywood Roof 

Assembly Manual

Revision #1.8 

September 19, 2022

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer 
Support Line @ 1-888-658-1658 within 30 days of the delivery of your  
purchase. It is our commitment to you to courier replacement parts, free of charge,  
within 10 business days of this notification. Replacement parts will not be  
provided free of charge after the 30 day grace period. 

Thank you for purchasing 
an 8x4 SpaceSaver Garden  
Shed. Please take the time  
to identify all the parts prior  
to assembly.

Please be aware that it is the 
customers’ sole responsibility 
to acquire the necessary 
building permits and or obtain 
approval from their local 
county, municipality or HOA 
prior to purchasing. Generally, 
shed structures under 100 
square feet do not require 
permits in most jurisdictions 
in the United States and 
Canada. 

Optional door 
configuration

Содержание 8x4 SpaceSaver Garden Shed Bevel Model with Plywood...



































Отзывы: