OLT SSGS1216-FJ-Ply Assembly Manual Download | Manualshive

Page: 1 / 49

background image

12x16 SunShed Garden Shed

FJ Bevel Model with Plywood Roof

Assembly Manual

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today free of any liability for improper installation,
maintenance and repair of any of our products.

Revision #2.4

Mar 9, 2022

Thank you for purchasing
a 12x16 SunShed Garden
Shed from Outdoor Living
Today. Please take the time
to identify all the parts prior
to assembly.

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the
instruction manual when building your
shed and retain the manual for future
maintenance purposes.

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer
Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our
commitment to you to courier replacement parts, free of charge, within 10 business days of
this notification. Replacement parts will not be provided free of charge after the 30 day grace
period.

Stock Code #

SSGS1216-FJ-Ply

Roof Area: 160 sqft

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

Page 1

1
2
3
...
»

Summary of Contents for SSGS1216-FJ-Ply


















































Reviews:

No comments

Related manuals for SSGS1216-FJ-Ply

Brand: garofalo Pages: 19

Brand: Clarke Pages: 16

Brand: Palmako Pages: 50

41212MR-12 SAND

Brand: Gazebo penguin Pages: 31

Brand: Lemeks Pages: 154

Brand: Valkea Pages: 23

Brand: Handy Home Products Pages: 65

Brand: Palmako Pages: 29

Brand: Mercia Garden Products Pages: 5

Brand: USP Pages: 4

DuraMax 8 Ft x 8 Ft DuraPlus

Brand: USP Pages: 17

ARBOR MANHATTAN 03420

Brand: TWIG Pages: 22

Apex Shed 8' x 6'

Brand: HUTTON Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands