Electrical System
The power trim pump's electrical system is
protected by either a 1A in-line fuse
(Figure 11, (1)) or an auto-reset circuit
breaker (Figure 11, (2)) located within the
trim motor. In the event of an electrical
overload, the fuse will blow out or the circuit
breaker will shut off. Correct the cause of the
electrical overload before operating the trim
system. If the electrical overload problem
still exists, contact your authorized Yanmar
Marine dealer or distributor.
0006011
(1)
(2)
Figure 11
1 – 1A Fuse Holder
2 – Auto-Reset Circuit Breaker
PRODUCT OVERVIEW
ZT350 Operation Manual
19
© 2008 Yanmar Marine International
