22
3. PRE-OPERATION PROCEDURES
Installation Procedure
3. Connection on main unit side.
(1) Remove the rubber cap from the
⑧
Water inlet plug.
(2) Connect Hose connector to
⑧
Water inlet plug
on main unit, with
the sleeve slid in the direction of
arrow. Release the sleeve and it will
return to its original position. This
completes the connection. A valve is
provided in hose connector, which
opens only when connected with
⑧
Water inlet plug
. Water will not flow
without this valve opened.
Water supply hose Main unit side
4. Be sure to attach the water supply hose to a tap with the drainage facility.
If water supply hose is connected to
a water tap without drainage facility,
and the hose comes off or becomes
damaged, severe water damage
may result. Be sure to connect water
supply hose to a water tap with
drainage.
5. Use optional "water supply unit" when the drainage facility is away from the tap.
Compared to the structure of standard "water hose set", that of "water inlet unit" is superior in
preventing connections from loosening when the water pressure fluctuates.
* If there is no water supply equipment, select and use an appropriate coupling from "Water inlet coupler"
in "List of Options" (P.66).
Sleeve
Water inlet plug
Valve
Hose
connector
Water tap
Water supply
hose
Hose
connector
(tap side)
Tap connector
Sink