11
2. COMPONENT NAMES AND FUNCTIONS
Dispenser tray / Multipurpose Distilled Water Outlet
Dispenser tray
Draw out dispenser tray when using. The load capacity of the tray is 10 kg for WG251 and 20 kg for
WG1001. Cooling water for condenser is used to drain water that has accumulated on dispenser tray.
Press the drain switch on the right side of dispenser tray under the following conditions. Cooling water
flows for one minute, and water will be drained from the tray. Thereafter, unit automatically returns to the
state before pressing the switch.
①
When the tank is full (distillation is stopped)
②
When collecting ion exchanged water
③
In the standby state (ELB is "ON(|)", the POWER key is "OFF(
○
)")
WG251
WG1001
Multipurpose distilled water outlet
The multipurpose distilled water outlet is located on the right side of unit and equipped with
one-touch joint (see P.12 for handling). Pull out the plug and connect the rigid tube with an O.D.
of
φ
8 mm. This allows to collect distilled water directly from the tank. It can also be used as a
connection port for options, etc.
* Note that the one-touch joint does not have a check valve function, so that water will come out when
the plug or tube is detached.
Dispenser tray drain
switch
Dispenser tray
Multipurpose distilled
water outlet
Dispenser tray
drain switch
Dispenser tray
Multipurpose distilled
water outlet