Yamaha WOLVERINE 2015 Page 27 Owner'S Manual Download

Page: 27 / 192

1-19

YAMAHA

2MB-F1696-10

WARNING

• Improper tire pressure or overloading this vehicle may

cause severe injury or death from loss of control or

rollover.

• Never set or allow tire pressure to be below the minimum.

Tire may dislodge from rim.

• VEHICLE LOAD of 0 kg (0 lb) ~ 327 kg (721 lbs)

Recommended: FRONT:

REAR:

Minimum:

FRONT:

REAR:

75 kPa

70 kPa

(11 psi)

(10 psi)

* Vehicle load is weight of operator, passengers,

accessories, cargo, and (if applicable) trailer tongue

weight. Do not exceed maximum vehicle load.

Gross Vehicle Weight Rating: 975 kg (2150 lbs)

maximum including vehicle, weight of operator,

passengers, accessories, cargo, and (if applicable)

trailer tongue weight.

OPERATING TIRE PRESSURE: With tires cold, set as follows.

WARNING

Fuel vapors can be a fire or explosion hazard.
To avoid injury or death, never store fuel or
flammable liquids in this storage compartment.

Storage should not exceed 13.5 lbs (6.4 kg)

2MB-F151F-00

UBN57AE0.book Page 19 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands