Yamaha WOLVERINE 2015 Owner'S Manual Download

Page: 76 / 192

5-2

Coolant

• Check coolant level in reservoir.
• Fill with coolant if necessary.

5-6, 8-25

Final gear oil/Differen-
tial gear oil

• Check for leakage.

5-6, 5-6, 8-20, 8-22

Accelerator pedal

• Check free play and for proper operation.

5-7

Seat belts

• Check for proper operation and belt wear.

5-7

Passenger handhold

• Check for stability and proper fastening.

5-7, 7-8

Steering

• Check for proper operation.

5-7

Fittings and fasteners

• Check all fittings and fasteners.

5-8

Instruments, lights and
switches

• Check operation, and correct if necessary.

5-8, 8-57, 8-59, 8-60

Wheels and tires

• Check tire pressure and for wear and damage.

5-8, 8-47, 8-49

Axle boots

• Check for damage.

8-31

ITEM

ROUTINE

PAGE

UBN57AE0.book Page 2 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands