Yamaha WOLVERINE 2015 Page 47 Owner'S Manual Download

Page: 47 / 192

4-8

To set the clock

1. Set the display to the clock mode.
2. Push the “SELECT” button and “RESET”

button together for at least three sec-
onds.

3. When the hour digits start flashing, push

the “RESET” button to set the hours.

4. Push the “SELECT” button, and the mi-

nute digits will start flashing.

5. Push the “RESET” button to set the minu-

tes.

6. Push the “SELECT” button, and then re-

lease it to start the clock.

Voltage display mode

This display shows the battery voltage.
“

” appears for 1 second when the volt-

age display mode is first selected, and
then “

” appears and the battery voltage is

displayed.
If the battery voltage is less than 10 volts,
“LO” is displayed, and if the voltage is above
16 volts, “HI” is displayed.

UBN57AE0.book Page 8 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands