manualshive.com logo in svg

Yamaha WOLVERINE 2015, Owner'S Manual

Share
Download
Yamaha WOLVERINE 2015 Owner'S Manual Download Page 167

8-52

8

NOTICE

ECB00932

To charge a VRLA (Valve Regulated Lead
Acid) battery, a special (constant-voltage)
battery charger is required. Using a con-
ventional battery charger will damage the
battery.

 

To store the battery

If the vehicle will not be used for more than
one month, remove the battery, fully charge
it, and then place it in a cool, dry place.

If the battery will be stored for more than
two months, check it at least once a month
and fully charge it if necessary.

NOTICE

ECB00941

Always keep the battery charged. Storing
a discharged battery can cause perma-
nent battery damage.

 

To install the battery

TIP

Be sure the battery is fully charged.

 

1. Place the battery in its compartment.
2. Connect the positive battery lead first,

then the negative battery lead by install-
ing their bolt. 

NOTICE:

 When installing

the battery, the main switch must be
off, and the positive lead must be con-
nected before the negative lead.

 [ECB01111]

1. Positive battery lead (red)
2. Battery band
3. Negative battery lead (black)

2

1

3

UBN57AE0.book  Page 52  Tuesday, November 24, 2015  1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands