Yamaha WOLVERINE 2015 Page 135 Owner'S Manual Download

Page: 135 / 192

8-20

15. Turn the engine off, wait at least 10 minu-

tes, and then check the oil level and cor-
rect it if necessary.

16. Install the rubber cover.
17. Install the passenger seat cushion.

EBU36130

Final gear oil

Checking the final gear oil level

1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its

gasket, and then check the oil level in the
final gear case. The oil level should be at
the brim of the filler hole.

3. If the oil is below the brim of the filler hole,

add sufficient oil of the recommended
type to raise it to the correct level.

NOTICE:

Be sure no foreign material

enters the final gear case.

[ECB00422]

4. Check the gasket for damage, and re-

place it if necessary.

5. Install the oil filler bolt and its gasket, and

then tighten the bolt to the specified
torque.

1. Final gear oil
2. Gasket
3. Final gear oil filler bolt
4. Correct oil level

UBN57AE0.book Page 20 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands