Yamaha WOLVERINE 2015 Owner'S Manual Download

Page: 166 / 192

8-51

2. Remove the hood. (See page 8-10 for

hood removal and installation proce-
dures.)

3. Remove the air intake duct panel by re-

moving the quick fastener screws.

4. Unhook the battery bands.
5. Disconnect the negative battery lead first,

then the positive battery lead by remov-
ing their bolt.

NOTICE:

When removing

the battery, the main switch must be

off, and the negative lead must be dis-
connected before the positive lead.

[ECB01002]

6. Pull the battery out of its compartment.

To charge the battery

Have a Yamaha dealer charge the battery as
soon as possible if it seems to have dis-
charged. Keep in mind that the battery tends
to discharge more quickly if the vehicle is
equipped with optional electrical accessories.

1. Quick fastener screw
2. Air intake duct panel

1. Positive battery lead (red)
2. Battery band
3. Negative battery lead (black)

UBN57AE0.book Page 51 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands