Yamaha WOLVERINE 2015 Page 139 Owner'S Manual Download

Page: 139 / 192

8-24

4. Remove the differential gear oil filler bolt,

the differential gear oil drain bolt and their
gasket to drain the oil.

5. Install the differential gear oil drain bolt

and its new gasket, and then tighten the
bolt to the specified torque.

6. Refill the differential gear case with the

recommended oil.

NOTICE:

Be sure no

foreign material enters the differential
gear case.

[ECB00412]

7. Check the oil filler bolt gasket for dam-

age, and replace it if necessary.

8. Install the differential gear oil filler bolt

and its gasket, and then tighten the bolt
to the specified torque.

9. Check for oil leakage. If oil leakage is

found, check for the cause.

1. Differential gear oil drain bolt
2. Gasket

Tightening torque:

Differential gear oil drain bolt:

9.8 Nm (0.98 m·kgf, 7.1 ft·lbf)

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

Oil quantity:

0.18 L (0.19 US qt, 0.16 Imp.qt)

Tightening torque:

Differential gear oil filler bolt:

23 Nm (2.3 m·kgf, 17 ft·lbf)

UBN57AE0.book Page 24 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands