Yamaha WOLVERINE 2015 Page 126 Owner'S Manual Download

Page: 126 / 192

8-11

To install

1. Insert the projections on the hood into the

slots in the front grill, and then place the
hood in the original position.

2. Turn the hood locks 1/4 turn counter-

clockwise, and then push the tab on each
hood lock down so that it is pointing rear-
ward. Make sure that the hood is securely
installed.

NOTICE

ECB02180

Do not drive the vehicle with the hood
open, unlatched, or removed.

EBU33602

Panels

Left panel

To remove the left panel

1. Remove the bolts.

2. Open the driver door, and then remove

the quick fastener screws.

1. Bolt
2. Left panel

UBN57AE0.book Page 11 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands