Yamaha WOLVERINE 2015, Owner'S Manual

Page: 67 / 192

4-28
4
WARNING
EWB00411
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.

Do not tamper with or attempt to open
the cylinder assemblies.

Do not subject the shock absorber as-
semblies to an open flame or other high
heat source. This may cause the unit to
explode due to excessive gas pressure.

Do not deform or damage the cylinders
in any way. Cylinder damage will result in
poor damping performance.

Do not dispose of a damaged or worn
out shock absorber assembly yourself.
Take the shock absorber assembly to a
Yamaha dealer for any service.
EBU33620
Adjusting the rear shock absorber as-
semblies
These shock absorber assemblies are
equipped with a spring preload adjusting nut,
a rebound damping force adjusting screw, a
compression damping force adjusting bolt
(for fast compression damping), and a com-
pression damping force adjusting screw (for
slow compression damping).
WARNING
EWB02492

Suspension components become hot
during operation. Never touch the com-
pression damping force adjusting bolt
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
18 click(s) in direction (b)*
Standard:
12 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in di-
rection (a)
UBN57AE0.book Page 28 Tuesday, November 24, 2015 1:42 PM