Yamaha WOLVERINE 2015 Owner'S Manual Download | Manualshive

Page: 75 / 192

background image

5-1

5

EBU31573

FOR YOUR SAFETY – PRE-OPERATION CHECKS

EBU31582

Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the Own-
er’s Manual.

WARNING

EWB00482

Failure to inspect or maintain the vehicle properly increases the possibility of an accident
or equipment damage. Do not operate the vehicle if you find any problem. If a problem can-
not be corrected by the procedures provided in this manual, have the vehicle inspected by
a Yamaha dealer.

Before using this vehicle, check the following points:

ITEM

ROUTINE

PAGE

Brakes

• Check operation, free play, fluid level, and fluid leakage.
• Fill with DOT 4 brake fluid if necessary.

5-3, 8-41, 8-44

Parking brake

• Check for proper operation.

Fuel

• Check fuel level.
• Fill with the recommended fuel if necessary.

Engine oil

• Check oil level.
• Fill with oil to proper level if necessary.

UBN57AE0.book Page 1 Tuesday, November 24, 2015 1:42 PM

«
...
73
74
75
76
77
...
»

Summary of Contents for WOLVERINE 2015

































































































































































































Reviews:

No comments

Related manuals for WOLVERINE 2015

Brand: Landoll Pages: 76

Brand: Arctic Cat Pages: 123

Brand: Kubota Pages: 96

Brand: Kubota Pages: 108

Brand: FLEMING Pages: 6

Brand: Foldy Pages: 44

2009 Outlander 500 EFI

Brand: Can-Am Pages: 152

Brand: Can-Am Pages: 127

Brand: KMW Pages: 98

2006 Sportsman 500 EFI

Brand: Polaris Pages: 126

Brand: Parklands Pages: 101

Brand: Ifor Williams Trailers Pages: 12

GRIZZLY 350 YFM35FGD

Brand: Yamaha Pages: 144

Brand: Yamaha Pages: 175

Brand: E-TON Pages: 225

Brand: Westbrook Trailers Pages: 34

Brand: Monster Moto Pages: 40

Brand: Kubota Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands