Yamaha WOLVERINE 2015 Page 178 Owner'S Manual Download

Page: 178 / 192

8-63

Engine overheating

Wait for the engine to cool before removing the radiator cap.

WARNING! If the engine is not

cool when removing the radiator cap, hot fluid and steam could blow out under pressure
and burn you.

[EWB03460]

Place a thick rag over the cap and remove the cap slowly to allow any re-

maining pressure to escape.

TIP

If it is difficult to get the recommended coolant, tap water can be used temporarily, provided that
it is changed to the recommended coolant as soon as possible.

Wait until the
engine has cooled.

Check the coolant level in the
coolant reservoir and/or radiator.

Level is OK.

Level is low, check the
cooling system for leakage.

No
leakage.

Leakage.

Ask a Yamaha dealer to inspect
and repair the cooling system.

Add coolant. (See TIP.)

Restart the engine. If the engine overheats again, ask a
Yamaha dealer to inspect and/or repair the cooling system.

UBN57AE0.book Page 63 Tuesday, November 24, 2015 1:42 PM

Summary of Contents for WOLVERINE 2015

































































































































































































Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands

Yamaha WOLVERINE 2015, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 2015

Reviews:

Related manuals for WOLVERINE 2015

Brands by name

Popular brands