3 - 13
INSP
ADJ
FRONT FORK INSPECTION/REAR SHOCK ABSORBER INSPECTION/
REAR SHOCK ABSORBER SPRING PRELOAD ADJUSTMENT
●
Tighten the wheel axle nut while pushing
down the drive chain.
T
R
.
.
Axle nut:
60 Nm (6.0 m • kg, 43 ft • lb)
EC36C000
FRONT FORK INSPECTION
1. Inspect:
●
Front fork smooth action
Operate the front brake and stroke the
front fork.
Unsmooth action/oil leakage
→
Repair
or replace.
EC36K000
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
●
Swingarm smooth action
Abnormal noise/unsmooth action
→
Grease the pivoting points or repair the
pivoting points.
Damage/oil leakage
→
Replace.
EC36M012
REAR SHOCK ABSORBER SPRING
PRELOAD ADJUSTMENT
1. Elevate the rear wheel by placing the
suitable stand under the engine.
2. Remove:
●
Rear shock absorber
Refer to “SWINGARM” section in the
CHAPTER 5.
3. Remove:
●
Spring guide
1
NOTE:
While compressing the spring, remove the
spring guide.
Summary of Contents for TTR90(M)
